Melitta® Aroma Enhance™ Glass Coffee Maker FAQ

How do I set water hardness?

How to set Water Hardness:
1. Press and hold down the CALC-button and briefly pressing the M-button to set the desired level of water hardness. The hardness setting will be display (see below chart for detail). Note: The default hardness of the coffee maker is 4.
2. Once you have set the desired level of water hardness, let go the CALC-button. You setting is now saved.
3. The settings and display are shown in the table.
Note:
Water Hardness cannot be programmed while brewing.
The last chosen water hardness level remains even after removing from power source.

The settings and display chart

Hardness Setting:	I	II	II	IV
°dH:	<7°dH	7-14°dH	12-21°dH	>21°dH
Display:	1	2	3	4

How do I descale my coffeemaker?

How to descale:
Follow the manufactuerer instructions regarding the amounts and pour the descaling agent into the water tank. Or we recommed fill up the water tank with half a tank of vinegar and top it off with clean water. Please do not exceed the MAX level.
1. Press the CALC button, the button will start blinking.
2. The descling process will run automatially. To remove stubborn limscale the descaling process takes 25 minutes. The remaining time is shown on the display.
3. When the descaling process is completed the light on the CALC button will go off. The appliance will turn off automatically.
4. At the end of the descling process, the appliace should be rinsed through TWICE, using the maximum amount of water without coffee. This will remove any remaining limescale or mineral deposits.
Attention: Only by carrying out the descaling process completely will all limescale or mineral deposits be removed and the light on the CALC button will go off. The descaling process should therefore not be interrupted before it has run for the full 25 minutes.

What features does the AromaSelector® have and how does it work?

Some of our coffeemakers are equipped with the AromaSelector®, you can individually rotate and adjust the taste of your coffee from mild, indulgent to strong & intensive.
Please refer to instruction manual how to set the AromaSelector®.

How do I clean my coffeemaker?

(1) Always unplug the unit before cleaning.
(2) The unit must never be cleaned under running water and must never be immersed in water.
(3) The glass carafe, the lid and the filter basket can be washed in the dishwasher.
(4) Rinse thermal carafe with clean water.
(5) Clean the housing of your coffeemaker with a damp cloth only.

Where can I buy accessories and replacement parts for my coffeemaker?

Please contact us via customerservice@wabilogic.com or call 1-855-888-1346 for the arrangement.